Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Why does raster bow in at sides on Monitor?

Pincushion Raster

Why does raster bow in at sides on Monitor?

by  RAYKEN  Posted    (Edited  )
DanSoft had question as to why this happened. Trouble is, this could be several problems. Check the voltages in the monitor. Also Vertical transformer, might be. I have had this problem in TV sets, Horizantal Oscillator was bad. Could be electronic component bad also. Get out the old ohmeter-voltmeter. Check voltages and items in Horizantal
vertical Osc. circuits. rayk7inm62@msn.com
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top