Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Report Settings Are Lost

Troubleshooting

Report Settings Are Lost

by  jmeadows7  Posted    (Edited  )
If you have run across the circumstnace of a report printing portrait when it should be landscape or something similar, it's NOT your fault and you don't have to do any huge coding to fix it.

If you're using Access 2000 - install sp1 as recommended in another FAQ - the knowledgebase article link is:
http://support.microsoft.com/kb/q240826/

If you're using Access XP - install sp3 - sp2 doesn't work, but sp3 seems to do the trick. This is a starting point - now I have a PC that SP3 was slipinstalled with office xp and am having this problem again.

Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top