Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Why do I get duplicate Autonumbers after upgrading to Access 2000

Troubleshooting

Why do I get duplicate Autonumbers after upgrading to Access 2000

by  ImpMan  Posted    (Edited  )
Have you just upgraded from Access 97 to Access 2000?
Have your autonumbers reset in your tables?
The problem is that Access 2000 requires a patch in-order for it to compact a database without destroying it! The database gets compacted automatically when you convert the database from 97 to 2000 versions.

The Solution, get the patch from Microsoft.
http://support.microsoft.com/default.aspx?scid=kb;EN-US;q257408

The other problem is that the database you have compacted is corrupt and isn't fixed with the patch. I haven't come up with a solution for this. I went back to an old version and then compacted with the patch in place.
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top