Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Code 9

Micros 3700

Code 9

by  Moregelen  Posted    (Edited  )
A code 9 errors typically means that there is a permissions error with a custom stored procedure in use by the report; this error can also indicate that the store procedure is not the same version of the procedure expected by the report.


[ol 1]
[li]Open Sybase (start -> run -> scjview)[/li]
[li]Log in as the DBA user.[/li]
[li]Double click on Procedures & Functions[/li]
[li]Locate the stored procedure in use by the report[/li]
[li]Right click, and select properties[/li]
[li]On the permission tab, click Grant[/li]
[li]Select report user (or all users if you don't mind) from the list and click ok.[/li]
[li]Click ok.[/li]
[li]Disconnect from Sybase.[/li]
[/ol]
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top