Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

File server recovery won't work

Fileserver Recovery

File server recovery won't work

by  coorsman  Posted    (Edited  )
Verify if read/write network connection exists between the FOH terminals and the file server's BOOTDRV share exists.

1. Create a txt file from the server on the terminal's bootdrv share and save it.

2. Create a txt file from the terminal to the servers bootdrv share nd save it.

3.Check the lana number for the network card assigned to Aloha is configured on the BOH.

4.Check the lana number for the network card assigned to Aloha is configured on the terminal.

5. Check the IP address and subnet on the file server and IP and subnet on the FOH terminals are properly configured

6. Verify if the SERVER, IBERROOT, TERMSTR, IBERDIR and variables have the same values on the file server and terminals. Open a dos prompt on the terminal and BOH type in SET then enter. Check the listed variables above.


Check debouts on the terminals
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top