Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How do I reboot/power down a CMS or Conversant?

Power Down/Power Up Procedures

How do I reboot/power down a CMS or Conversant?

by  PBXTech  Posted    (Edited  )
Log into the CMS or Conversant.

The Conversant will now be at a command prompt.

In a CMS, look for an 'xterm' window. If you don't see one, left click and select 'xterm'. Default terminal type is 615.

At the command line in either system, type '/user/sbin/shutdown -y -g0 -i0' for shutdown or type '/user/sbin/shutdown -y -g0 -i6' for reboot.
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top