Abbreviated dial Programing

1 On a separate sheet of paper, write down the outside numbers, extensions, and/or feature codes you want to program as items on your personal list(s). Notes: - Each telephone number or feature code is stored as a separate list item. - You can store a maximum of 100 AD entries in a personal list.

2 Pick up the handset. [dial tone]

3 Dial the AD Program feature access code *0. [dial tone]

4 Dial the personal list number (1, 2, or 3). [dial tone]

5 Dial the list item (1, 2, or 3). [dial tone]

6 Dial the number you want to program (up to 24 digits). NOTE: If you are programming an outside number, be sure to include a trunk code, if applicable.

7 Press <#> . [confirmation tone]ò The number is stored.

8 Repeat Steps 4 through 6 if you want to program additional items on the same list. Note that system and group lists can have a maximum of 100 entries.

Hang up and begin again at Step 1 if you want to program items on another list. Note that you can access a maximum of three lists in any combination - personal, system, and group.

9 Hang up to end programming.

NOTE: Keep a copy of your own personal lists; group, system, and enhanced lists are available from your system manager.