Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Activating Call Forwarding

Call Forwarding

Activating Call Forwarding

by  dialtone  Posted    (Edited  )
Using Call Forwarding (CF)
Look for [color red]Call Forwarding Activation[/color] on the 10th line of page 1 of the Feature Access Code Listing (command = disp fea). There will be 3 entries on that line, one for [color red]Busy/DA:[/color], one for [color red]All:[/color], and one for [color red]Deactivation:[/color]. Take note of each one.

The procedure is slightly different for stations that have Console Permissions, than the one for those that don't. Console Permissions is controlled by Class of Service (COS). First, check the COS for the station (command = disp station nnnn). Next, check the COS to see if Console Permissions is set to "y" (command = disp COS).

To forward all calls on station 1234 with Console Permissions, to station 5678:
[li]dial the FAC for CF [color red]All:[/color] [li]wait for dialtone [li]dial the station number that you wish to forward - 1234[li]wait for dialtone [li]dial the number that you want calls to forward to - 5678[li]wait for confirmation tone (stutter dialtone)[li]make a test call from another station [/li]

To forward all calls on a station that doesn't have Console Permissions:
[li]dial the FAC for CF [color red]All:[/color] [li]wait for dialtone [li]dial the number that you want calls to forward "to" [li]wait for confirmation tone (stutter dialtone)[li]make a test call from another station [/li]


To deactivate CF on a station with Console Permissions:
[li]dial the FAC for [color red]Deactivation:[/color][li]wait for dialtone [li]dial the number of the station that was forwarded][li]wait for dialtone [li]dial the number of the station that was forwarded "to" [li]wait for confirmation tone (stutter dialtone) [li]make a test call from another station [/li]

To deactivate CF on a station without Console permissions:
[li]dial the FAC for [color red]Deactivation:[/color][li]wait for dialtone [li]dial the number of the station that was forwarded "to" [li]wait for confirmation tone (stutter dialtone) [li]make a test call from another station[/li]

*:->*
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top