Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP-Phone installation instructions.

IP-Phone installation instructions.

by  BobFox  Posted    (Edited  )
Example IP HardPhone

add station 3333 (Page 1)

Extension: 3333 Lock Message? n BCC: 0
Type: 4624 Security Code: 1234 TN: 1
Port: IP Coverage Path 1: COR: 6
Name: Bob Fox Coverage Path 2: COS: 1
Hunt-to Station:

STATION OPTIONS
loss Group: 2 Personalized Ringeng Pattern: 1
Message Lamp Ext: 3333
Speakerphone: 2-way Mute Button Enable? y
Display Language: english

Media Complex Ext:
IP SoftPhone? n

(Page 2)is default but check these options
Service Link Mode: As-needed
Multimedia Mode: enhanced
Direct IP-IP Audio Conn? y
IP Audio Hairpinning: y

The other pages are default.
This is tested on Definity R9.5
and IPHardPhone Software version 1.51

Example IP SoftPhone

add station 4444 (Page 1)

Extension: 4444 Lock Message? n BCC: 0
Type: 6416D+ Security Code: 1234 TN: 1
Port: IP Coverage Path 1: COR: 6
Name: Bob Fox Coverage Path 2: COS: 1
Hunt-to Station:

STATION OPTIONS
loss Group: 2 Personalized Ringeng Pattern: 1
Message Lamp Ext: 3333
Speakerphone: 2-way Mute Button Enable? y
Display Language: english

Media Complex Ext:
IP SoftPhone? y

(Page 2)is default but check these options
Service Link Mode: As-needed
Multimedia Mode: enhanced
Direct IP-IP Audio Conn? y
IP Audio Hairpinning: y

The other pages are default.
This is tested on Definity R9.5
and IPSoftPhone Software version R3 v1.04



Thats it

I hope this wil get you in the right direction.

Greets, Bob
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top