Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to Make your own 355 adapter

Legend Programming

How to Make your own 355 adapter

by  MrTelecom1  Posted    (Edited  )
To make a 355 type adapter arrangement for the Legend or Magix:
Use GRAYBAR part no.: ATDB9F-8

(the pin numbers listed are that of the DB9-F back side of connector, numbered 1-9,
the Color is that of the wires coming off the 8 pin modular female connector of the DB9)

PIN COLOR
----------------------------------------
1 Orange
2 Green
3 Yellow
4 Black
5 Red
6 vacant
7 vacant
8 Blue

(the White and Brown wire is unused- store & insulate)
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top