Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Program System Speed Dials

Legend Programming

Program System Speed Dials

by  SuperTanker  Posted    (Edited  )
Programming System Speed Dials

Programming abbreviated dialing or speed dials in Legend systems is a bit more complex than using the quick access drop down list on the newer Merlin systems.

Once connected to the console select:
Sys Programming->Exit[color green](F5)[/color]->More[color green](PgUp)[/color]->Labeling[color green](F1)[/color]->Directory[color green](F1)[/color]->Systems[color green](F1)[/color]-> Dail speed dial no. ->Enter

[color blue]NOTE: To program in a pause use the pause button at the bottom or press ALT+H[/color]

Once done back up your system as you normally would to save the change, and publish the speed dial list to your users as appropriate.
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top