Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

What software needs to run on the RF terminals to support SAPConsole?

Native SAP Mobile Technologies

What software needs to run on the RF terminals to support SAPConsole?

by  vermeulenm  Posted    (Edited  )
All the required software is standard and available from the equipment vendor. Typically a RF terminal includes the Operating System, radio drivers, LAN drivers, TCP/IP stack and terminal emulation client. All you need to do is some device settings and point the device to the host machine running the Telnet Server Software.

For more information you can go to a search engine such as Google and search with the keyword "SAPConsole". There are a lot of good sites listed on this search engine. There is even a site where you can request a White Paper on SAPConsole
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top