Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Booting into Single User mode

Netra X1 Servers

Booting into Single User mode

by  abovebrd  Posted    (Edited  )
Just in case anyone one runs into this problem here is the answer. After much research and poor documentation.

Booting into single user mode on a Sun Netra X1 server

1. Break into the lomlite shell "lom>" during boot
#.

2. from the lomlite shell use the "break" command. This will put you at the ROM prompt (OK)
lom> break

Note: I had to run through steps 1 and 2 twice before I was able to break out into the "ROM" prompt (OK)

3. ok> boot -s

4. Now re-mount "/" filesystem with read-write permissions
mount -o remount /

5. Now you can edit the faulty startup script (/etc/rc2.d)
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top