Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

What program to use in Windows for Z-modem?

Telenetworking/Telnet

What program to use in Windows for Z-modem?

by  TimeTraveler  Posted    (Edited  )
Using 'telnet' in the Run... dialog box will not provide Z-modem file transfers. There is another program usually found in a normal Windows install called HyperTerminal that provides Z-modem transfers and handles the 'rz' and 'sz' commands.
This program is accessed on XP thru Start / All Programs / Accessories / Communications / HyperTerminal.

This is useful for some servers or accounts where an FTP server is not setup or available. Z-modem uses the actual connection itself to transfer data, rather than an Internet protocol.
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top