Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations sizbut on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Why doesn't the control-break sequence work on Cisco routers?

Cisco COM port bugs

Why doesn't the control-break sequence work on Cisco routers?

by  state  Posted    (Edited  )
A bug in Microsoft's Kernal on Windows 95, 98, or NT 4.0, prevents the shipped version of HyperTerminal from sending the correct interrupt. To fix this problem you have to download HyperTerminal 5.0 from the Hilgraeve site (free) @ http://www.hilgraeve.com.&nbsp ; This has saved me a tremendous amount of frustration, and it will do the same for you.

Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top