Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Can I change the options on an installed port?

Installing/upgrading ports

Can I change the options on an installed port?

by  Wishdiak  Posted    (Edited  )
If you have installed a port and have changed your mind about the install options that are presented, 'make deinstall && make reinstall' will build the port with the same options that you already selected, without prompting you.

Can you change these options? Yes.

The options are stored in the options file in /var/db/ports/<port_name>/. Delete the options file specific to the port you wish to change, and you'll be presented with the same install options as when you originally installed the port.
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top