Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Excessive number of volumes showing as filling and not being reused.

Excessive number of volumes showing as filling and not being reused.

by  LED888  Posted    (Edited  )
Question
Why does a deduplicated storage pool show an excessive number of volumes as filling but are not
being reused?

Cause
Collocation is being used on the dedupulicated storage pool.
Best practices indicate that collocation should not be used on deduplicated storage pools. Reading a deduplicated object requires the retrieval of chunks from other objects which likely requires the mounting of other volumes. This action defeats the purpose of collocation.

Answer
Disable collocation on the storage pool using the UPDATE STGPOOL command. This will allow the filling volumes that were previously not being selected for output to be used again.
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top