Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to reset the caroot password

Caroot

How to reset the caroot password

by  GSC  Posted    (Edited  )
1. Open a command prompt on the server where you want to change/reset the caroot password.
2. In the command prompt browse to the drive where you have ARCServe installed (e.g. C:\Program Files\CA\...)
3. Once in the ARCServe folder type in the following: cstop
4. This will stop the ARCServe services that are running.
5. When all services are stopped open the Windows Explorer and browse to the folder:
C:\Program Files\CA\BrightStor ARCserve Backup\Data\Discovery
Here you will find a folder that has the name of your server.
6. Rename this folder.
7. Back in the command prompt type in the following: cstart
8. This will start the ARCServe services that were stopped in item 4.
9. Still in the command prompt type in the following:
Authsetup/p "password" where ôpasswordö is what you want the new password to be.
10. Close the command prompt and try to open ARCServe with the new password.
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top