Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to auto prune the activity log

Job Engine

How to auto prune the activity log

by  davidmichel  Posted    (Edited  )
Several optional settings are provided to configure auto-pruning of the ARCserve Activity Log under the Admin\AutoPruneActivityLog key:

Enable
Set Enable:REG_DWORD:1 (TRUE) to enable the pruning of the Activity Log on the local machine. The default is 0 (FALSE).

Type
Set Type:REG_DWORD:0 (FALSE) to prune the entire Activity Log. The default is 1 (TRUE) which will prune records older than a specified amount of time (i.e. number of days, months or years). Indicate the Unit and Number (see below) to define the specific time period in which the Autopruning of the Activity Log will take place.

Unit
Set Unit:REG_DWORD to indicate the frequency of the Activity Log pruning: 0x0 - Days, 0x1 - Months, and 0x3 - Years. The default is 1 (Months).

Number
Set Number:REG_DWORD to indicate the number of days, months or years to prune the Activity Log. The default is 1 (month).
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top