Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Server 2003 & Backup Exec v9

Veritas Support

Server 2003 & Backup Exec v9

by  airbourne  Posted    (Edited  )
Follow these steps IN THIS ORDER! Failure to adhere to strict order and rebooting after each step may cause undesireable and unrecoverable problems with your backup exec. I got this from Veritas Technical support because I was having trouble using my Backup Exec with Server 2003.


(First)
VERITAS Backup Exec 9.0 for Windows Servers revision 4454 (Single .ZIP download)
http://seer.support.veritas.com/docs/258718.htm


(Second)
9.0.4454 Hotfix 2 - Device and Media Support (Adds support for the Super Advanced Intelligent Tape (S-AIT) media type
http://seer.support.veritas.com/docs/261561.htm


(Third)
VERITAS Backup Exec (tm) 9.0 - Device Driver Installer (20031015) - Includes Tape Driver Release (20030902) and Robotic Library Release (40) (Intel Only)
http://seer.support.veritas.com/docs/263506.htm



***DISCLAIMER***
The Device Driver listed here may not apply to your individual tape device, so a call to Veritas technical support may be required.
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top