Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Client agent buffer event

Client Agent buffer

Client agent buffer event

by  databasebaba  Posted    (Edited  )
Update the Latest Service Pack on both arcserve server and the client machine.

Then you can change the following regsitry hack,

run regedt32
then goto:
hkey_local_machine->software->computerassociates->ArcserveIT->clientagent->
Parameters:
and edit the entries in it as follows:
change the max send packet size (decimal value) to: 2048
change the Rec daemon buffer count (decimal value) to: 128
change the receive time out (decimal value) to: 2048
change the send time out (decimal value) to: 2048
change the set thread priority backup (decimal value) to: 1
change the ws receive buffer size to: 2
change the ws send buffer size to: 2
change the ws tcp no delay to: 2
change the trunclog to: 2

Set the Antivirus scan to incoming only.

Check if the NIC drivers etc are kept to the latest.

DatabaseBaba

Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top