Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How do I create a RAM filesystem in AIX?

AIX Commands

How do I create a RAM filesystem in AIX?

by  PSD  Posted    (Edited  )
If you wish to create a RAM filesystem within AIX follow the procedure below - N.B. this procedure is undocumented.....

To create a RAM flesystem:

mkramdisk 16384 (# of 512K blocks = 8MB in this example)

mkfs -V jfs -o "log=nointegrity,nbpi=512" /dev/ramdisk0

mount -V jfs -o nointegrity /dev/ramdisk0 /mnt

To remove a RAM filesystem:

unmount /mnt

rmramdisk /dev/ramdisk0
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top