Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to make the Server Support Diskette 2 which contaiks the SCSI controller Drivers.

Server Support Diskette 2

How to make the Server Support Diskette 2 which contaiks the SCSI controller Drivers.

by  Sunny79  Posted    (Edited  )
1.Auto Run any Compaq Smart Start CD within the Operating System.
2.Agree to the first prompt.
3.Pick the Option 'Create Support Software/Created Software Diskettes from CD only/COMPAQ/COMPAQ server support software for Winnt4.0 v. 2.xx'

This will create the server support software disk 2 which contains all the drivers for SCSI cards and controllers used for Winnt4.0 and Win2k. This Disk is mostly used to specify array controller or SCSI Card drivers during a Manual Operating system install or if you want to just reinstall a SCSI controller or Array controller driver.

Good Luck. If there are any questions or if anyone is unclear about something please contact me. Thankyou.
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top