Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to make the SPD.INI Server Profile Diskette for the Assisted Install on the Smart Start CD.

Making SPD.INI Floppy

How to make the SPD.INI Server Profile Diskette for the Assisted Install on the Smart Start CD.

by  Sunny79  Posted    (Edited  )
Go to any NT computer and create a Notepad file and save it as SPD.INI and that is it. There should be a cog wheel that shows up on the file and that means that you created the file successfully. Put that file on a Floppy and you have made a SERVER PROFILE DISKETTE.
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top