Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How do I restore focus to Procomm?

Aspect (Procomm)

How do I restore focus to Procomm?

by  mrnoisy  Posted    (Edited  )
There are quite a few command to restore focus (as shown under Procomm Aspect Help "Task/Window Manipulation Commands") but these have a tendance to fail depending on the current state of the PC.

The most reliable way I found to ensure that Procomm is the top and active window is to minimize and restore the window as shown in the example below.

Code:
proc main
.
.
.
winminimize $PWMAINWIN
winrestore $PWMAINWIN
.
.
.
endproc

Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top