Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

I want to convert my DOS Clipper application to Windows. Where do I start?

Converting to Windows

I want to convert my DOS Clipper application to Windows. Where do I start?

by  GoranStojanov  Posted    (Edited  )
There are several paths. One of them is gLib:

http://home.rochester.rr.com/glib/

It provides very easy and smooth migration, and in addition to the large compatibility with the Clipper, it provides some enhancements: digitron like input of the numbers, better infield validation, three level postvalidation, data-aware masks...

You can download a fully functional demo program from the web page and test it yourself.

Best Regards,
Goran

[thumbsup2]
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top