Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Andrzejek on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

List of PCL parameterised escape sequences - part 1

PCL5

List of PCL parameterised escape sequences - part 1

by  DansDadUK  Posted    (Edited  )
The following table shows brief details of parameterised PCL escape sequences (part 1).
A companion FAQ shows part 2 (the details are too much to include in one entry).

If the description of the sequence is prefixed with "*", this indicates that it is considered to be obsolete.

Note that few (if any) printers will support all of the sequences; most of them are relevant to laser printers, but some are only meaningful to inkjet devices.

Parameterised sequences - part 1:

Where the sequence is expected to have discrete values, the known enumeration values (and their meanings) are given for each such value.
[tt]
<Esc>%#A Enter PCL Mode (?value)
<Esc>%#A (#=0) Enter PCL Mode: Cursor=PCL
<Esc>%#A (#=1) Enter PCL Mode: Cursor=HP-GL/2
<Esc>%#B Enter HP-GL/2 Mode (?value)
<Esc>%#B (#=0) Enter HP-GL/2 Mode: Pen=HP-GL/2
<Esc>%#B (#=1) Enter HP-GL/2 Mode: Pen=PCL
<Esc>%#B (#=2) Enter HP-GL/2 Mode: Pen=HP-GL/2; x/y=PCL
<Esc>%#B (#=3) Enter HP-GL/2 Mode: Pen=PCL; x/y=PCL
<Esc>%#B (#=-1) Enter HP-GL/2 Mode: Single Context
<Esc>%#X (#=-12345) Universal Exit Language (UEL)
<Esc>&a#C Cursor Position (columns): Horizontal
<Esc>&a#G Duplex Page Side Selection (?value)
<Esc>&a#G (#=0) Duplex Page Side Selection: Next Side
<Esc>&a#G (#=1) Duplex Page Side Selection: Front Side
<Esc>&a#G (#=2) Duplex Page Side Selection: Back Side
<Esc>&a#H Cursor Position (decipoints): Horizontal
<Esc>&a#L Left Margin (columns)
<Esc>&a#M Right Margin (columns)
<Esc>&a#N Negative Motion (?value)
<Esc>&a#N (#=0) Negative Motion: Present
<Esc>&a#N (#=1) Negative Motion: Not Present
<Esc>&a#P Print Direction (?value)
<Esc>&a#P (#=0) Print Direction: 0 degree rotation
<Esc>&a#P (#=90) Print Direction: 90 degree ccw rotation
<Esc>&a#P (#=180) Print Direction: 180 degree ccw rotation
<Esc>&a#P (#=270) Print Direction: 270 degree ccw rotation
<Esc>&a#R Cursor Position (rows): Vertical
<Esc>&a#T * Set Horizontal Tab (column)
<Esc>&a#U * Clear Horizontal Tab (column)
<Esc>&a#V Cursor Position (decipoints): Vertical
<Esc>&a#W Define Logical Page
<Esc>&b#F Finish Mode (?value)
<Esc>&b#F (#=0) Finish Mode: Matte
<Esc>&b#F (#=1) Finish Mode: Glossy
<Esc>&b#M Monochrome Print Mode (?value)
<Esc>&b#M (#=0) Monochrome Print Mode: Mixed Rendering
<Esc>&b#M (#=1) Monochrome Print Mode: Grey Equivalent
<Esc>&b#T Dry Timer (seconds)
<Esc>&b#W Configuration (I/O)
<Esc>&c#T Text Path Direction (?value)
<Esc>&c#T (#=0) Text Path Direction: Horizontal
<Esc>&c#T (#=-1) Text Path Direction: Vertical Rotated
<Esc>&c#W Cluster Printing
<Esc>&d#@ Underline Disable
<Esc>&d#D Underline Enable (?value)
<Esc>&d#D (#=0) Underline Enable
<Esc>&d#D (#=3) Underline Enable: Floating
<Esc>&f#F Media Eject Length (decipoints)
<Esc>&f#G Page Width (decipoints)
<Esc>&f#S Cursor Position Stack (?value)
<Esc>&f#S (#=0) Cursor Position Stack: Push (Store)
<Esc>&f#S (#=1) Cursor Position Stack: Pop (Recall)
<Esc>&f#X Macro Control (?value)
<Esc>&f#X (#=0) Macro Control: Start Macro Definition
<Esc>&f#X (#=1) Macro Control: Stop Macro Definition
<Esc>&f#X (#=2) Macro Control: Execute Macro
<Esc>&f#X (#=3) Macro Control: Call Macro
<Esc>&f#X (#=4) Macro Control: Enable Macro For Overlay
<Esc>&f#X (#=5) Macro Control: Disable Overlay
<Esc>&f#X (#=6) Macro Control: Delete All Macros
<Esc>&f#X (#=7) Macro Control: Delete Temporary Macros
<Esc>&f#X (#=8) Macro Control: Delete Macro
<Esc>&f#X (#=9) Macro Control: Make Macro Temporary
<Esc>&f#X (#=10) Macro Control: Make Macro Permanent
<Esc>&f#X (#=11) Macro Control: Create Bitmap of Macro
<Esc>&f#Y Macro ID
<Esc>&i#W Underware Function Configuration
<Esc>&k#E * Underline Enhancement (?value)
<Esc>&k#E (#=0) * Underline Enhancement: Line-By-Line
<Esc>&k#E (#=1) * UnderLine Enhancement: Modal
<Esc>&k#F * Shift In/Out Control (?value)
<Esc>&k#F (#=0) * Shift In/Out Control: Line-By-Line
<Esc>&k#F (#=1) * Shift In/Out Control: Modal
<Esc>&k#G Line Termination (?value)
<Esc>&k#G (#=0) Line Termination: CR=CR, LF=LF, FF=FF
<Esc>&k#G (#=1) Line Termination: CR=CR+LF, LF=LF, FF=FF
<Esc>&k#G (#=2) Line Termination: CR=CR, LF=CR+LF, FF=CR+FF
<Esc>&k#G (#=3) Line Termination: CR=CR+LF, LF=CR+LF, FF=CR+FF
<Esc>&k#H Horizontal Motion Index (1/120 inches)
<Esc>&k#I * Character Set Selection Control (?value)
<Esc>&k#I (#=0) * Character Set Selection Control: SI/SO
<Esc>&k#I (#=1) * Character Set Selection Control: bit 8
<Esc>&k#S * Pitch Mode (?value)
<Esc>&k#S (#=0) * Pitch Mode: Pica (10 cpi)
<Esc>&k#S (#=1) * Pitch Mode: Double Wide (5 cpi)
<Esc>&k#S (#=2) * Pitch Mode: Compressed (16.6 cpi)
<Esc>&k#S (#=3) * Pitch Mode: Double Wide Comp. (8.3 cpi)
<Esc>&k#S (#=4) * Pitch Mode: Elite (12 cpi)
<Esc>&k#S (#=8) * Pitch Mode: Double Width/Height
<Esc>&k#V * Head View Mode (?value)
<Esc>&k#V (#=0) * Head View Mode: Enable
<Esc>&k#V (#=1) * Head View Mode: Disable
<Esc>&k#W * Print Mode (Text) (?value)
<Esc>&k#W (#=0) * Print Mode (Text): Unidirectional (L->R)
<Esc>&k#W (#=1) * Print Mode (Text): Bidirectional
<Esc>&k#W (#=2) * Print Mode (Text): Unidirectional (R->L)
<Esc>&k#W (#=3) * Print Mode (Text): High Intensity
<Esc>&k#W (#=5) * Print Mode (Text): Text Scale Off
<Esc>&k#W (#=6) * Print Mode (Text): Text Scale On
<Esc>&k#W (#=7) * Print Mode (Text): Fast High Intensity
<Esc>&l#A Page Size (?value)
<Esc>&l#A (#=1) Page Size: Executive
<Esc>&l#A (#=2) Page Size: Letter
<Esc>&l#A (#=3) Page Size: Legal
<Esc>&l#A (#=6) Page Size: Ledger
<Esc>&l#A (#=25) Page Size: A5
<Esc>&l#A (#=26) Page Size: A4
<Esc>&l#A (#=27) Page Size: A3
<Esc>&l#A (#=80) Page Size: Monarch Envelope
<Esc>&l#A (#=81) Page Size: COM-10 Envelope
<Esc>&l#A (#=90) Page Size: DL Envelope
<Esc>&l#A (#=91) Page Size: C5 Envelope
<Esc>&l#A (#=100) Page Size: B5 Envelope
<Esc>&l#A (#=101) Page Size: Custom
<Esc>&l#C Vertical Motion Index (1/48 inches)
<Esc>&l#D Line Spacing (lines per inch)
<Esc>&l#E Top Margin (lines)
<Esc>&l#F Text Length (lines)
<Esc>&l#G Output Bin: Value is Printer Dependent
<Esc>&l#G (#=0) Output Bin: Automatic Selection
<Esc>&l#H Paper Source: Value is Printer Dependent
<Esc>&l#H (#=0) Paper Source: Unchanged (eject page)
<Esc>&l#J * Auto Justification (?value)
<Esc>&l#J (#=0) * Auto Justification: None
<Esc>&l#J (#=1) * Auto Justification: Right Flush
<Esc>&l#J (#=2) * Auto Justification: Centred
<Esc>&l#J (#=3) * Auto Justification: Justified
<Esc>&l#L Perforation Skip (?value)
<Esc>&l#L (#=0) Perforation Skip: Disable
<Esc>&l#L (#=1) Perforation Skip: Enable
<Esc>&l#M Media Type (?value)
<Esc>&l#M (#=0) Media Type: Plain Paper
<Esc>&l#M (#=1) Media Type: Bond Paper
<Esc>&l#M (#=2) Media Type: Special Paper
<Esc>&l#M (#=3) Media Type: Glossy Film
<Esc>&l#M (#=4) Media Type: Transparency Film
<Esc>&l#O Orientation (?value)
<Esc>&l#O (#=0) Orientation: Portrait
<Esc>&l#O (#=1) Orientation: Landscape
<Esc>&l#O (#=2) Orientation: Reverse Portrait
<Esc>&l#O (#=3) Orientation: Reverse Landscape
<Esc>&l#P Page Length (lines)
<Esc>&l#R * Clear Vertical Tab Absolute (line)
<Esc>&l#S Simplex/Duplex (?value)
<Esc>&l#S (#=0) Simplex/Duplex: Simplex
<Esc>&l#S (#=1) Simplex/Duplex: Duplex Long-Edge Bind
<Esc>&l#S (#=2) Simplex/Duplex: Duplex Short-Edge Bind
<Esc>&l#T Job Separation (?value)
<Esc>&l#T (#=1) Job Separation: On
<Esc>&l#U Left (Long-Edge) Offset (decipoints)
<Esc>&l#V * Vertical Position Via VFC (channel)
<Esc>&l#W * Define VFC Table
<Esc>&l#X Number of Copies
<Esc>&l#Y * Set Vertical Tab Absolute (line)
<Esc>&l#Z Top (Short-Edge) Offset (decipoints)
<Esc>&n#W Alphanumeric ID
<Esc>&p#C Palette Control (?value)
<Esc>&p#C (#=0) Palette Control: Delete All in Store
<Esc>&p#C (#=1) Palette Control: Delete All in Stack
<Esc>&p#C (#=2) Palette Control: Delete Palette
<Esc>&p#C (#=6) Palette Control: Copy Palette
<Esc>&p#I Palette Control ID
<Esc>&p#S Select Palette
<Esc>&p#W Escapement Encapsulated Text
<Esc>&p#X Transparent Print
<Esc>&r#F Flush (?value)
<Esc>&r#F (#=0) Flush: All Complete Pages
<Esc>&r#F (#=1) Flush: All Pages
<Esc>&s#C End-of-Line Wrap (?value)
<Esc>&s#C (#=0) End-of-Line Wrap: Enable
<Esc>&s#C (#=1) End-of-Line Wrap: Disable
<Esc>&s#I * Character Set Default Control (?value)
<Esc>&s#I (#=0) * Character Set Default Control: Blank
<Esc>&s#I (#=1) * Character Set Default Control: Ignore
<Esc>&t#P Text Parsing Method (?value)
<Esc>&t#P (#=0) Text Parsing Method: 1-byte
<Esc>&t#P (#=1) Text Parsing Method: 1-byte
<Esc>&t#P (#=2) Text Parsing Method: 2-byte
<Esc>&t#P (#=21) Text Parsing Method: 1|2-byte Asian 7bit
<Esc>&t#P (#=31) Text Parsing Method: 1|2-byte Shift-JIS
<Esc>&t#P (#=38) Text Parsing Method: 1|2-byte Asian 8bit
<Esc>&t#P (#=83) Text Parsing Method: Unicode
<Esc>&t#P (#=1008) Text Parsing Method: UTF-8
<Esc>&u#D Unit-of-Measure (PCL units per inch)
<Esc>&v#S * Text Colour (?value)
<Esc>&v#S (#=0) * Text Colour: Black
<Esc>&v#S (#=1) * Text Colour: Red
<Esc>&v#S (#=2) * Text Colour: Green
<Esc>&v#S (#=3) * Text Colour: Yellow
<Esc>&v#S (#=4) * Text Colour: Blue
<Esc>&v#S (#=5) * Text Colour: Magenta
<Esc>&v#S (#=6) * Text Colour: Cyan
<Esc>&v#S (#=7) * Text Colour: White
<Esc>(#@ Primary Font: Select Default
<Esc>(#A Primary Font: Symbol Set
<Esc>(#B Primary Font: Symbol Set
<Esc>(#C Primary Font: Symbol Set
<Esc>(#D Primary Font: Symbol Set
<Esc>(#E Primary Font: Symbol Set
<Esc>(#F Primary Font: Symbol Set
<Esc>(#G Primary Font: Symbol Set
<Esc>(#H Primary Font: Symbol Set
<Esc>(#I Primary Font: Symbol Set
<Esc>(#J Primary Font: Symbol Set
<Esc>(#K Primary Font: Symbol Set
<Esc>(#L Primary Font: Symbol Set
<Esc>(#M Primary Font: Symbol Set
<Esc>(#N Primary Font: Symbol Set
<Esc>(#O Primary Font: Symbol Set
<Esc>(#P Primary Font: Symbol Set
<Esc>(#Q Primary Font: Symbol Set
<Esc>(#R Primary Font: Symbol Set
<Esc>(#S Primary Font: Symbol Set
<Esc>(#T Primary Font: Symbol Set
<Esc>(#U Primary Font: Symbol Set
<Esc>(#V Primary Font: Symbol Set
<Esc>(#W Primary Font: Symbol Set
<Esc>(#X Primary Font: Select by ID
<Esc>(#Y Primary Font: Symbol Set
<Esc>(#Z Primary Font: Symbol Set
<Esc>(f#W Define Symbol Set
<Esc>(s#B Primary Font: Stroke Weight (?value)
<Esc>(s#B (#=0) Primary Font: Stroke Weight: Medium
<Esc>(s#B (#=1) Primary Font: Stroke Weight: Semi Bold
<Esc>(s#B (#=2) Primary Font: Stroke Weight: Demi Bold
<Esc>(s#B (#=3) Primary Font: Stroke Weight: Bold
<Esc>(s#B (#=4) Primary Font: Stroke Weight: Extra Bold
<Esc>(s#B (#=5) Primary Font: Stroke Weight: Black
<Esc>(s#B (#=6) Primary Font: Stroke Weight: Extra Black
<Esc>(s#B (#=7) Primary Font: Stroke Weight: Ultra Black
<Esc>(s#B (#=-7) Primary Font: Stroke Weight: Ultra Thin
<Esc>(s#B (#=-6) Primary Font: Stroke Weight: Extra Thin
<Esc>(s#B (#=-5) Primary Font: Stroke Weight: Thin
<Esc>(s#B (#=-4) Primary Font: Stroke Weight: Extra Light
<Esc>(s#B (#=-3) Primary Font: Stroke Weight: Light
<Esc>(s#B (#=-2) Primary Font: Stroke Weight: Demi Light
<Esc>(s#B (#=-1) Primary Font: Stroke Weight: Semi Light
<Esc>(s#H Primary Font: Pitch (characters per inch)
<Esc>(s#P Primary Font: Spacing (?value)
<Esc>(s#P (#=0) Primary Font: Spacing: Fixed
<Esc>(s#P (#=1) Primary Font: Spacing: Proportional
<Esc>(s#Q * Primary Font: Quality (?value)
<Esc>(s#Q (#=0) * Primary Font: Quality: Data Processing
<Esc>(s#Q (#=1) * Primary Font: Quality: Near Letter
<Esc>(s#Q (#=2) * Primary Font: Quality: Letter
<Esc>(s#S Primary Font: Style
<Esc>(s#T Primary Font: Typeface
<Esc>(s#U * Primary Font: Placement (?value)
<Esc>(s#U (#=0) * Primary Font: Placement: Normal
<Esc>(s#U (#=1) * Primary Font: Placement: Inferior
<Esc>(s#U (#=-1) * Primary Font: Placement: Superior
<Esc>(s#V Primary Font: Height (points)
<Esc>(s#W Download Character
<Esc>)#@ Secondary Font: Select Default
<Esc>)#A Secondary Font: Symbol Set
<Esc>)#B Secondary Font: Symbol Set
<Esc>)#C Secondary Font: Symbol Set
<Esc>)#D Secondary Font: Symbol Set
<Esc>)#E Secondary Font: Symbol Set
<Esc>)#F Secondary Font: Symbol Set
<Esc>)#G Secondary Font: Symbol Set
<Esc>)#H Secondary Font: Symbol Set
<Esc>)#I Secondary Font: Symbol Set
<Esc>)#J Secondary Font: Symbol Set
<Esc>)#K Secondary Font: Symbol Set
<Esc>)#L Secondary Font: Symbol Set
<Esc>)#M Secondary Font: Symbol Set
<Esc>)#N Secondary Font: Symbol Set
<Esc>)#O Secondary Font: Symbol Set
<Esc>)#P Secondary Font: Symbol Set
<Esc>)#Q Secondary Font: Symbol Set
<Esc>)#R Secondary Font: Symbol Set
<Esc>)#S Secondary Font: Symbol Set
<Esc>)#T Secondary Font: Symbol Set
<Esc>)#U Secondary Font: Symbol Set
<Esc>)#V Secondary Font: Symbol Set
<Esc>)#W Secondary Font: Symbol Set
<Esc>)#X Secondary Font: Select by ID
<Esc>)#Y Secondary Font: Symbol Set
<Esc>)#Z Secondary Font: Symbol Set
<Esc>)s#B Secondary Font: Stroke Weight (?value)
<Esc>)s#B (#=0) Secondary Font: Stroke Weight: Medium
<Esc>)s#B (#=1) Secondary Font: Stroke Weight: Semi Bold
<Esc>)s#B (#=2) Secondary Font: Stroke Weight: Demi Bold
<Esc>)s#B (#=3) Secondary Font: Stroke Weight: Bold
<Esc>)s#B (#=4) Secondary Font: Stroke Weight: Extra Bold
<Esc>)s#B (#=5) Secondary Font: Stroke Weight: Black
<Esc>)s#B (#=6) Secondary Font: Stroke Weight: Extra Black
<Esc>)s#B (#=7) Secondary Font: Stroke Weight: Ultra Black
<Esc>)s#B (#=-7) Secondary Font: Stroke Weight: Ultra Thin
<Esc>)s#B (#=-6) Secondary Font: Stroke Weight: Extra Thin
<Esc>)s#B (#=-5) Secondary Font: Stroke Weight: Thin
<Esc>)s#B (#=-4) Secondary Font: Stroke Weight: Extra Light
<Esc>)s#B (#=-3) Secondary Font: Stroke Weight: Light
<Esc>)s#B (#=-2) Secondary Font: Stroke Weight: Demi Light
<Esc>)s#B (#=-1) Secondary Font: Stroke Weight: Semi Light
<Esc>)s#H Secondary Font: Font: Pitch (characters per inch)
<Esc>)s#P Secondary Font: Spacing (?value)
<Esc>)s#P (#=0) Secondary Font: Spacing: Fixed
<Esc>)s#P (#=1) Secondary Font: Spacing: Proportional
<Esc>)s#Q * Secondary Font: Quality (?value)
<Esc>)s#Q (#=0) * Secondary Font: Quality: Data Processing
<Esc>)s#Q (#=1) * Secondary Font: Quality: Near Letter
<Esc>)s#Q (#=2) * Secondary Font: Quality: Letter
<Esc>)s#S Secondary Font: Style
<Esc>)s#T Secondary Font: Typeface
<Esc>)s#U * Secondary Font: Placement (?value)
<Esc>)s#U (#=0) * Secondary Font: Placement: Normal
<Esc>)s#U (#=1) * Secondary Font: Placement: Inferior
<Esc>)s#U (#=-1) * Secondary Font: Placement: Superior
<Esc>)s#V Secondary Font: Height (points)
<Esc>)s#W Download Font Header
<Esc>*b#B Grey Balancing (?value)
<Esc>*b#B (#=1) Grey Balancing: Enable
<Esc>*b#B (#=2) Grey Balancing: Disable
<Esc>*b#M Set Compression Mode (?value)
<Esc>*b#M (#=0) Set Compression Mode: Unencoded
<Esc>*b#M (#=1) Set Compression Mode: Run-Length Encoded
<Esc>*b#M (#=2) Set Compression Mode: TIFF
<Esc>*b#M (#=3) Set Compression Mode: Delta Row
<Esc>*b#M (#=5) Set Compression Mode: Adaptive
<Esc>*b#M (#=6) Set Compression Mode: CCITT G3 1-D (MH)
<Esc>*b#M (#=7) Set Compression Mode: CCITT G3 2-D (MR)
<Esc>*b#M (#=8) Set Compression Mode: CCITT G4 2-D (MMR)
<Esc>*b#M (#=9) Set Compression Mode: Replaced Delta Row
<Esc>*b#S Seed Row Source (plane)
<Esc>*b#V Transfer Raster Data (Plane)
<Esc>*b#W Transfer Raster Data (Row/Block)
<Esc>*b#X * Raster Line X Offset (pixels)
<Esc>*b#Y Y Offset (raster lines)
<Esc>*c#A Rectangle Size (PCL units): Horizontal
<Esc>*c#B Rectangle Size (PCL units): Vertical
<Esc>*c#C * Large Character Placement (column)
<Esc>*c#D Assign Font ID Number
<Esc>*c#E Character Code
<Esc>*c#F Font Control (?value)
<Esc>*c#F (#=0) Font Control: Delete All Soft Fonts
<Esc>*c#F (#=1) Font Control: Delete All Temporary Fonts
<Esc>*c#F (#=2) Font Control: Delete Soft Font
<Esc>*c#F (#=3) Font Control: Delete Character Code
<Esc>*c#F (#=4) Font Control: Make Soft Font Temporary
<Esc>*c#F (#=5) Font Control: Make Soft Font Permanent
<Esc>*c#F (#=6) Font Control: Copy/Assign Font As Temp.
<Esc>*c#G Assign Pattern ID
<Esc>*c#H Rectangle Size (decipoints): Horizontal
<Esc>*c#K HP-GL/2 Plot Size (inches): Horizontal
<Esc>*c#L HP-GL/2 Plot Size (inches): Vertical
<Esc>*c#M * Large Character Size (magnification)
<Esc>*c#N * Large Character Tab
<Esc>*c#P Fill Rectangular Area (?value)
<Esc>*c#P (#=0) Fill Rectangular Area: Solid Area
<Esc>*c#P (#=1) Fill Rectangular Area: Solid White Areas
<Esc>*c#P (#=2) Fill Rectangular Area: Shading
<Esc>*c#P (#=3) Fill Rectangular Area: Cross-Hatch
<Esc>*c#P (#=4) Fill Rectangular Area: User Pattern
<Esc>*c#P (#=5) Fill Rectangular Area: Current Pattern
<Esc>*c#Q Pattern Control (?value)
<Esc>*c#Q (#=0) Pattern Control: Delete All Patterns
<Esc>*c#Q (#=1) Pattern Control: Delete Temporary Patterns
<Esc>*c#Q (#=2) Pattern Control: Delete Pattern
<Esc>*c#Q (#=3) Pattern Control: Reserved
<Esc>*c#Q (#=4) Pattern Control: Make Pattern Temporary
<Esc>*c#Q (#=5) Pattern Control: Make Pattern Permanent
<Esc>*c#R Assign Symbol Set ID
<Esc>*c#S Symbol Set Control (?value)
<Esc>*c#S (#=0) Symbol Set Control: Delete User-Defined
<Esc>*c#S (#=1) Symbol Set Control: Delete All Temporary
<Esc>*c#S (#=2) Symbol Set Control: Delete Symbol Set
<Esc>*c#S (#=4) Symbol Set Control: Make Temporary
<Esc>*c#S (#=5) Symbol Set Control: Make Permanent
<Esc>*c#T Set Picture Frame Anchor Point (?value)
<Esc>*c#T (#=0) Set Picture Frame Anchor Point
<Esc>*c#V Rectangle Size (decipoints): Vertical
<Esc>*c#W Download User-Defined Pattern
<Esc>*c#X Picture Frame Size (decipoints): Width
<Esc>*c#Y Picture Frame Size (decipoints): Height
<Esc>*c#Z * Large Character Print Data
<Esc>*g#W Configure Raster Data
<Esc>*i#W Set Viewing Illuminant
[/tt]
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top