Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How do u clear the screen in OS390

Clear screen in MVS or OS390

How do u clear the screen in OS390

by  Robinhood361  Posted    (Edited  )
TSO does not provide any explicit command to clear the screen. IBM do provide some assembler macros. These macros
can be used to clear the screen. You can ask your system administrator to use one of these these macros to create an EXEC.

The best way is to work is to use ISPF display diologs.
You can refer to the IBM book manager site below to learn how to use ISPF dialog boxes

http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/BOOKS/ISPDGD04/FRONT_1.3?DT=20000717151307
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top