Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Why doesn't this work? [Troubleshooting Tips]

Basics

Why doesn't this work? [Troubleshooting Tips]

by  jimoblak  Posted    (Edited  )
1)
Before assuming the sky is falling, check to make sure that your application is fully up-to-date. Quark never leaves a software at version x.0. There are always .x patches that may resolve your issue. Both versions 6 and 7 have had at least 3 updates each. Updates can be downloaded for free from http://www.quark.com

2)
If QuarkXPress presents an error message, search for that message in Google. You are likely to find others that encountered the same error and found a solution.

If nothing is found in a search engine, post the error message here. It is difficult for others to help if all you tell them is 'it won't open' or 'it doesn't work'. In more recent versions of QuarkXPress you can look at the crash log for details.

This FAQ was inspired by thread260-1341751
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top