Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

remotely change cfc or system recordings

system programming

remotely change cfc or system recordings

by  theislandtech  Posted    (Edited  )
Applications -> Disa
add disa
give a disa name
give a real strong pin
submit

next

limit access only through a known called id
Connectivity -> Inbound Route
add incoming route
description = my-access
callerid = your callerid
cid priority route checked
set destination to disa my-access
submit
apply

to use
call from a phone with the programed caller id
the system will answer prompting for the pin
the correct pin will give dial tone then you can dial the toggle code or any valid destination
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top