Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Why do I get "Error?" with a Report TextBox Control Source That's Correct

1. ASCII Table

Why do I get "Error?" with a Report TextBox Control Source That's Correct

by  Quehay  Posted    (Edited  )
If you put a control formula in a text box on a report and find that it gives "Error?" when you know the formula is correct. . .make sure that you drag an unbound textbox on to the report from the toolbox rather than dragging a default textbox from the field list and then reformatting it. For whatever reason at the deeper level Access won't take a field-dedicated textbox and allow subsequent changes to the control source.
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top