Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Why don't my breakpoints stop the code anymore?

General

Why don't my breakpoints stop the code anymore?

by  Sensibilium  Posted    (Edited  )
There is a simple solution to this, even though getting the answer proved a tad difficult at first (this version of the FAQ actually works, unlike the original FAQ I posted which only told half the story).

Here's what you need to do:

In Access - Go to Tools|Startup..., click Advanced, and make sure 'Use Special Keys' is ticked.

In the VB Editor - Go to Tools|Options, click the General tab, and select 'Break On All Errors' under 'Error Trapping'.

Your breakpoints will then all come back to life.
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top