Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Overview for Conversion to Access 2000

Version or Conversion Related

Overview for Conversion to Access 2000

by  elizabeth  Posted    (Edited  )
Microsoft has a 27-page white paper by Darla Hagerson on this topic. It covers converstion to 2000 from versions 2.0, 95 and 97. For conversion from 1.0, you must first convert to 2.0. Try this link:

http://www.microsoft.com/TechNet/Access/technote/conv2000.asp or
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q237313

If niether link works, try searching the Microsoft Knowledge Base:
http://search.microsoft.com/us/default.asp

using keywords "Access 2000 Conversion Darla"
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top