Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mixing Access 2000 and Æ97 (work around)

97 and 2000

Mixing Access 2000 and Æ97 (work around)

by  DougP  Posted    (Edited  )
Mixing Access 2000 and Æ97 (work around)

We have both Access 2000 and Access Æ97clients installed on Computers in the building.
On some cases the Access Æ97 clients wanted to see the Access 2000 database. We did not want to upgrade them to Access 2000.
So what I did was create 3 databases
1 Access Æ97 database as a backend where the data is kept.
1 Access Æ97 database with forms and reports etc.
1 Access 2000 database with just forms and reports etc.
So the two front ends are both looking at the same backend data.
Since Access Æ97 cannot see a Access 2000 backend. I made it a Æ97 backend and it works fine.
Access 2000 clients see the old Æ97 data and donÆt want to convert it.
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top