Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to suppress a section containing a blank subreport

Seagate Documents

How to suppress a section containing a blank subreport

by  MalcolmW  Posted    (Edited  )
I wrestled with this for a while, figured out a way of doing it, then decided to check the knowledge base just in case. They used the same kludge I did, but probably can explain it better.
see "Suppressing section containing blank subreport in
Crystal Reports" at
http://support.crystaldecisions.com/library/kbase/articles/c2005853.asp
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top