Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CLID Routing Table programming

Basic Programming

CLID Routing Table programming

by  curlycord  Posted    (Edited  )
CLID Routing Table enables you to direct a caller based on their Caller ID to one of the following:
-Table
-CCR
-Mailbox
-DN

Note that the caller will hear the Greeting X for your Table first before following the rule (except -DN).

Workaround options:
If you have the same greeting 24/7
-instead of 2 separate greetings (Greeting 1 followed by CCR 1) record the whole greeting in CCR, then tell Table 1 to play Greeting X (a greeting that has not been recorded).

If you have a Day and a Night greeting then copy Tree 1 to 10 and 11
-Record the whole greeting in CCR 10 with your Day greeting
-Record the whole greeting in CCR 11 with your Night greeting
-In Table 1 tell Morn & Aft to use Tree 10, then tell Evening & Non-Bus to use Tree 11

This is just a guide/example, you can use what ever Trees and Table you want.
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top