Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Serial port commands and useful tips for BCM 50/450 & 400 Systems

BCM Patches and Status

Serial port commands and useful tips for BCM 50/450 & 400 Systems

by  Firebird Scrambler  Posted    (Edited  )
The link below will take yo to a site where I've done a guide that you should you how to connect up to a BCM 50 to carry out fault finding and will enable you to fix BCM 50 systems that would have otherwise been scrapped.

http://www.ghtrout.com/files/BCM_50_Serial_Port_and_components_layout.zip

The guide explains how to purchase a USB to TTF 3.3 volts cable and it also gives some tips for all Linux BCM systems. The guide will be subject to modification and the version number will be at the bottom.


Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top