Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to reset password on Digital Mobility Controller DMC320

Digital Mobility

How to reset password on Digital Mobility Controller DMC320

by  atcom  Posted    (Edited  )
Thanks to Talesk for a helpful post on this:

1) Remove the cover of the DMC (take the 3 "A" screws out of the back and slide the cover up)

2) Connect a null modem cable to the DMC and open HyperTerminal with these settings:
Baud Rate: 115200
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: Hardware

3) Place the jumper to the left of the CPU on

4) Press the Reset Button below the jumper

5) You should see a menu appear in Hyper Terminal

6) Type 'J' then press Enter; you should see a message indicating the password has been reset

7) Remove the jumper and press the Reset Button again

8) You should now be able to log in to the DMC with the original password: 'default'
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top