Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How do I format Non-Mitel Hard Drives

Mitel Hard Drives

How do I format Non-Mitel Hard Drives

by  kwbMitel  Posted    (Edited  )
For those without Mitel On Line Access, I am posting the following Knowledge Base Article generated by Mitel.

Article ID #
06-9999-00020

Publish Date
Nov-8-2006

Article Title
How to partition a new drive manually

Description/Symptoms
How to partition a new drive manually

Body/Solutions
As of version 6.1 UR1, you can partition a new drive manually when you install it. To do this, follow the instructions below.

Step 1
======
- Change the fields in the BootLine as shown below

boot device : motfcc
file name : Boot_Install
host inet(h) : Address of Ftp Server which holds the MN3300 software (i.e. 10.44.16.126)
other(o) : FixPartition

Step 2
======
- Reboot the system

The system will be doing the partition automatically, formatting the hard drive and installing the desired software on the box as usual.


Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top