Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Changing the GUI Login Password on the 200ICP

HOW TO

Changing the GUI Login Password on the 200ICP

by  MitelInMyBlood  Posted    (Edited  )
A Graphical User Interface (GUI) was introduced in the MITEL SX200 ICP starting in release 3.0.2.5

If it becomes necessary to change the login password for the GUI interface, you must change it in both the SX200ICP maintenance screen as well as in CDE form 28. The resulting new passwords must be identical and match exactly. If the passwords are different then you will be unable to access the system via the GUI.
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top