Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Ports Used By NBX

General NBX Configuration

Ports Used By NBX

by  techguru69  Posted    (Edited  )
The IMAP4 protocol uses port 25 (SMTP) to send mail, but an IMAP4 server uses port 143 to listen for mail.

To allow IP telephones and Analog Line ports to download, open the following ports through the firewall: UDP 2093 - 2096.

To access NetSet remotely, open port 80.

To use ConneXtions use ports 1025 - 5000 for TCP traffic.

To use ConneXtions use ports 8000 - 8099 by default for UDP traffic.

Port 1720 is used to negotiate and must be preserved.

TCP ports 1040 through 1044 and UDP 2093 through 2096 for NBX behind firewalls.

TCP port 1040 (used for call setup)

NBX_CALL_CONTROL_UDP_PORT = 2093

NBX_AUDIO_UDP_PORT = 2094

NBX_INTER_NCP_SIGNALING_UDP_PORT = 2095

NBX_DIRECTORY_SERVICES_UDP_PORT = 2096
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top