Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Why the linker does not find "_WinMain@16 symbol, when you build an MFC application with UNICODE ?

Linking errors

Why the linker does not find "_WinMain@16 symbol, when you build an MFC application with UNICODE ?

by  MSamoila  Posted    (Edited  )
The linker generate the error:

Error LNK2001: '_WinMain@16': Unresolved External Symbol
ID: Q125750

CAUSE
MFC UNICODE applications use wWinMainCRTStartup as the entry point.

RESOLUTION
In the Output category of the Link tab in the Project Settings dialog box, set the Entry Point Symbol to wWinMainCRTStartup.


Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top