Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to disable CRL check in the Live Meeting 2007 Client

Live Meeting 2007

How to disable CRL check in the Live Meeting 2007 Client

by  computerhighguy  Posted    (Edited  )
If the Live Meeting 2007 cannot get to the CRL distribution point for the ceritificate (Details Tab --> CRL Distribution Points on the Root CA certificate), it usually won't log in (although documentation says it should time out after 30 seconds and connect anyway). This most commonly is an issue when you are using an internal CA that is either offline or firewalled off. Commonly I see this when using an internal Root CA on the external interface of the Access Edge Server. External clients will not typically have access to the Root CA server behind the corporate firewall.

Disable CRL checking on Live Meeting Client:

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Live Meeting\CertificatePolicy
Set EnableCRLChecking = 0 (if does not exist, please create a DWORD value.)
Restart computer to take effect.
Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top