Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to install a modem on a Catalyst 6509

Cisco:Switches

How to install a modem on a Catalyst 6509

by  bmorritt  Posted    (Edited  )
To connect a modem to the console port, place the console port mode
switch in the in position.(The little hole next to the console port) Connect to the port using the RJ-45-to-RJ-45 cable and the RJ-45-to-DB-25 DCE adapter (labeled "Modem").
See:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/6000hw/mod_ins
t/03inst.htm


At this point you would need to know how to operate your modem to get it
to communicate with a standard EIA/TIA-232 port as described here:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/6000hw/mod_ins
t/01overvw.htm#xtocid131585

Register to add this FAQ to your archive
Register to rate this FAQ  : BAD 1 2 3 4 5 6 7 8 9 10 GOOD
Please Note: 1 is Bad, 10 is Good :-)

Part and Inventory Search

Back
Top