Yet another Dump Problem

[dugdstew1]

Hi,

I have a 2 LIM system BC11.

I had both my HDU's go bad and my dumps started failing. I have replaced the HDU's and rebuilt the filesystem but I am still getting a buffer error. Here are the results.

<cnlip:lim=1,dev=yes;

LIM CONFIGURATION
LIM NUMBER 1
LIM CONTROL LIM CONTROL NUMBER OF SERVICE
SYSTEM SIDE SYSTEM STATE PCM-LINKS STATE LIM
A EXECUTING 2 ACTIVE
B NOT EQUIPPED
MEMORY MEMORY MEMORY SPARE
VOLUME SPARE AFTER PACKING
65535 KB 25042 KB 25042 KB
BUAR1 3498 KB BUAR2 2695 KB
INTER LIM SIGNAL PACKET LENGTH CAPABILITY
BPOS CAPABILITY
001-0-00 90
001-1-00 90

DEVICE BOARDS
NUMBER OF
BPOS BOARDID INDIVIDUALS SERVICE STATE
001-0-00 36 32 ACTIVE
001-0-10 102 32 ACTIVE
001-0-20 77 16 ACTIVE
001-0-22 77 16 ACTIVE
001-0-30 77 16 ACTIVE
001-0-32 77 16 ACTIVE
001-0-40 52 24 ACTIVE
001-0-43 NOT EQUIPPED
001-0-50 NOT EQUIPPED
001-0-51 NOT EQUIPPED
001-0-52 NOT EQUIPPED
001-0-53 NOT EQUIPPED
001-0-60 106 16 ACTIVE
001-0-62 77 16 ACTIVE
001-0-70 42 32 ACTIVE
001-1-00 36 32 ACTIVE
001-1-10 102 32 ACTIVE
001-1-20 77 16 ACTIVE
001-1-22 77 16 ACTIVE
001-1-30 77 16 ACTIVE
001-1-32 77 16 ACTIVE
001-1-40 87 16 ACTIVE
001-1-42 87 16 ACTIVE
001-1-50 87 16 ACTIVE
001-1-52 77 16 ACTIVE
001-1-60 77 16 ACTIVE
001-1-62 77 16 ACTIVE
001-1-70 52 24 ACTIVE
001-1-73 NOT EQUIPPED
001-2-00 52 24 SYSTEM BLOCKED
001-2-03 NOT EQUIPPED
001-2-10 NOT EQUIPPED
001-2-11 NOT EQUIPPED
001-2-12 NOT EQUIPPED
001-2-13 NOT EQUIPPED
001-2-20 77 16 ACTIVE
001-2-22 77 16 ACTIVE
001-2-30 77 16 ACTIVE
001-2-32 77 16 ACTIVE
001-2-40 77 16 ACTIVE
001-2-42 77 16 ACTIVE
001-2-50 87 16 ACTIVE
001-2-52 77 16 ACTIVE
001-2-60 77 16 ACTIVE
001-2-62 77 16 ACTIVE
001-2-70 85 12 ACTIVE
001-2-72 29 2 PASSIVE
001-2-73 34 3 ACTIVE


END

<cnlip:lim=2,dev=yes;

LIM CONFIGURATION
LIM NUMBER 2
LIM CONTROL LIM CONTROL NUMBER OF SERVICE
SYSTEM SIDE SYSTEM STATE PCM-LINKS STATE LIM
A EXECUTING 2 ACTIVE
B NOT EQUIPPED
MEMORY MEMORY MEMORY SPARE
VOLUME SPARE AFTER PACKING
65535 KB 29970 KB 29970 KB
BUAR1 3308 KB BUAR2 2548 KB
INTER LIM SIGNAL PACKET LENGTH CAPABILITY
BPOS CAPABILITY
002-0-00 90
002-1-00 90

DEVICE BOARDS
NUMBER OF
BPOS BOARDID INDIVIDUALS SERVICE STATE
002-0-00 36 32 ACTIVE
002-0-10 102 32 ACTIVE
002-0-20 52 24 ACTIVE
002-0-23 NOT EQUIPPED
002-0-30 52 24 ACTIVE
002-0-33 NOT EQUIPPED
002-0-40 52 24 ACTIVE
002-0-43 NOT EQUIPPED
002-0-50 NOT EQUIPPED
002-0-51 NOT EQUIPPED
002-0-52 NOT EQUIPPED
002-0-53 NOT EQUIPPED
002-0-60 77 16 ACTIVE
002-0-62 77 16 ACTIVE
002-0-70 42 32 ACTIVE
002-1-00 36 32 ACTIVE
002-1-10 102 32 ACTIVE
002-1-20 52 24 ACTIVE
002-1-23 NOT EQUIPPED
002-1-30 NOT EQUIPPED
002-1-31 NOT EQUIPPED
002-1-32 87 16 ACTIVE
002-1-40 77 16 ACTIVE
002-1-42 87 16 ACTIVE
002-1-50 NOT EQUIPPED
002-1-51 NOT EQUIPPED
002-1-52 NOT EQUIPPED
002-1-53 NOT EQUIPPED
002-1-60 52 24 ACTIVE
002-1-63 NOT EQUIPPED
002-1-70 52 24 PASSIVE
002-1-73 NOT EQUIPPED
002-2-00 NOT EQUIPPED
002-2-01 NOT EQUIPPED
002-2-02 NOT EQUIPPED
002-2-03 NOT EQUIPPED
002-2-10 NOT EQUIPPED
002-2-11 NOT EQUIPPED
002-2-12 NOT EQUIPPED
002-2-13 NOT EQUIPPED
002-2-20 NOT EQUIPPED
002-2-21 NOT EQUIPPED
002-2-22 NOT EQUIPPED
002-2-23 NOT EQUIPPED
002-2-30 87 16 ACTIVE
002-2-32 87 16 ACTIVE
002-2-40 87 16 ACTIVE
002-2-42 87 16 ACTIVE
002-2-50 NOT EQUIPPED
002-2-51 NOT EQUIPPED
002-2-52 NOT EQUIPPED
002-2-53 NOT EQUIPPED
002-2-60 87 16 ACTIVE
002-2-62 NOT EQUIPPED
002-2-63 NOT EQUIPPED
002-2-70 NOT EQUIPPED
002-2-71 NOT EQUIPPED
002-2-72 NOT EQUIPPED
002-2-73 NOT EQUIPPED


END
<FIFTI:SUBFS=SYSSUBFS21;
FUNCTION TEST RESULT
TEST OK
END

<FIFTI:SUBFS=SYSSUBFS11;
FUNCTION TEST RESULT
TEST OK
END

<DUSYI;
SYSTEM DUMP INFORMATION
NO VALID RELOAD DIRECTORY EXISTS
RESULT OF PASSIVE COMMON FUNCTIONS UPDATE

BUFFER TRANSFER ERROR 04:13 11AUG09
FAILED IN LIM001 DOM

<allop;
ALARM LOG
IDENTITY: FIRSTAMERICAN
VERSION: CXP1010030/5/BC11SP14/R4C

DATE: 11AUG09 TIME: 02:59:51
CLASS: 3
85 BUFFER TRANSFER HAS FAILED
DATE TIME ALP NOIF EQU BRDID INF1 INF2 INF3 INF4
11AUG09 02:58:53 1 1 001-0-60-00 106 359 0 1 1

<HIMDP:LIM=1;

DIAGNOSTICS FROM OPERATING SYSTEM
TIME DATE
03:00:07 11AUG09
DIAGNOSTICS FROM LIM 001, LAST HIREI: 02:59:42 11AUG09

TIME DATE ERROR CODE
03:00:02 11AUG09 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 0201D308
BRANCHVALUE = 00000005
ENTER
HWSW B-LEVEL SIGNAL CLOSEHWRES (H'0006)
FROM DEVICE EQU NO 1-0-60-00
TO NIP (H'056) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 8
WITH 0 1 2 3 4 5 6 7 8 9
000 00 00 3D AE 00 00 00 85
STACK ADDRESS = 00000000
SIGNAL SEND ADDRESS = 00000000

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 01 61 F2 02 00 94 5E

TIME DATE ERROR CODE
03:00:02 11AUG09 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 02014D4C
BRANCHVALUE = 00000006
ENTER
SWSW B-LEVEL SIGNAL *************** (H'0000)
FROM PRP (H'004) EXE A IN LIM 001
TO FIP (H'04F) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 1
WITH 0 1 2 3 4 5 6 7 8 9
000 00
STACK ADDRESS = 00000000
SIGNAL SEND ADDRESS = 0200364E

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 01 4D 2E 02 01 09 24

Do I have a problem with my NIU?
I have done a PCREGEN but if my power dies my system will be toast.
Please let me know if I need to provide any additional info!

Thanks!

 

[whosrdaddy]

first restart NIP,FIP and TWP3 in LIM 1.

try to dump again.

second thing to try again is to pull out/put back in the DSU board LIM 1 mag 0.

what is the result of these printouts?

DUBDP;
IODDP;
FISCPI:IODEV=SYSDISK1;

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[dugdstew1]

Hi Daddy!

Forgive me for being a dangerous beginner. Will I have any problems running rfpui with my system in this state?

rfPUI:UNIT=NIP,FIP,TWP3,LIM=1;

Here are the printouts.


<dubdp;
BACKUP DATA
EXTERNAL BACKUP LATEST PREVIOUS
REL1 REL2
NOT VALID NOT VALID
LOCAL BACKUP
DIVERGENT TIME AND DATE LIM 1 04:57 08JUN09 01:00 14MAY09
2 04:57 08JUN09 01:00 14MAY09

END

<ioddp;
I/O DEVICE DATA
NODE IODEV/SUBFS BPOS/EQU I/O-BUS TYPE/USAGE STATUS AUTH
SYSN - 001-0-60 - - IN SERVICE
SYSN SYSDISK1 001-0-60-0 SCSI/3 ADTX IN SERVICE
SYSSUBFS11
SYSSUBFS21
SYSN SYSNET3 001-0-60-0 SCSI/4 ADTX IN SERVICE
SYSSUBSMDR
SYSN SYSTERMINAL 001-0-60-1 - MML - 7
SYSN MODEM 001-0-60-2 - MML - 7
SYSN SYSNET3 001-0-60-4 - NETWORK/OUT IN SERVICE
SYSN SYSNET2 001-0-60-4 - NETWORK/MML - 7
END

<fiscP:IODEV=SYSDISK1;
FILE SYSTEM CAPACITY DATA
TOTAL DISK SPACE: 2067 MBYTES
SUBFS: SYSSUBFS11
KBYTES FILES
TOTAL AVAIL TOTAL MOUNTED
61440 60955 15000 /SYSN/USR1
SUBFS: SYSSUBFS21
KBYTES FILES
TOTAL AVAIL TOTAL MOUNTED
61440 60957 15000 /SYSN/USR2
END

 

[whosrdaddy]

mmm, your local backup dates from 8 june? did you do many changes from then till now?

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[dugdstew1]

A just a few changes. If I could just remember them! Will I lose them if I RFPUI?

 

[whosrdaddy]

a data reload is always possible, yes.

It's up to you to take the risk, but having a PC-regen backup helps is a big advantage, so I would go ahead.

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[dugdstew1]

Heck, I will go for it. I will do it tonight in case I need to do some rebuilding. I will let you know!

Thanks!

 

[doktor]

Did you try to restart DRDH, DRDM, DRLM and DRLH?

RFPUI:UNIT=,LIM=1;

This helped me out a couple of times.

///doktor

 

[dugdstew1]

Hey Daddy,

I gave it a try. Restarted NIP,FIP and TWP3 with no luck. Pulled the DSU and reseated it with the same results.

I also tried doktor's advice and restarted DRDH, DRDM, DRLM and DRLH with no luck.

Any thing else we can try?

Thanks!

 

[whosrdaddy]

mmm, it's the unit copy that is failing, even before the dump starts.

please post CNPIP:UNIT=DOM;


/daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[whosrdaddy]

try to restart DRLR and INR in all lims and try to dump again.

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[dugdstew1]

I just gave it a try and same thing.

<RFPUI:LIM=1&2,UNIT=DRLR;
RFPUI:LIM=1&2,UNIT=DRLR;
SURE? (YES/NO)
<y;

RESTART PROGRAM UNIT
LIM STARTED PU:S FAILED PU:S
1 DRLR
2 DRLR

EXECUTED

<RFPUI:LIM=1&2,UNIT=INR;
RFPUI:LIM=1&2,UNIT=INR;
SURE? (YES/NO)
<Y;
y;

RESTART PROGRAM UNIT
LIM STARTED PU:S FAILED PU:S
1 INR
2 INR

EXECUTED

<duSYi;
SYSTEM DUMP INFORMATION
NO VALID RELOAD DIRECTORY EXISTS
RESULT OF PASSIVE COMMON FUNCTIONS UPDATE

BUFFER TRANSFER ERROR 14:53 14AUG09
FAILED IN LIM001 DOM

END

<allop;
ALARM LOG
IDENTITY: FIRSTAMERICAN
VERSION: CXP1010030/5/BC11SP14/R4C

DATE: 14AUG09 TIME: 14:55:13
CLASS: 3
85 BUFFER TRANSFER HAS FAILED
DATE TIME ALP NOIF EQU INF1 INF2 INF3 INF4
14AUG09 14:53:52 1 1 001-0-**-** 359 6 1 2

85 BUFFER TRANSFER HAS FAILED
DATE TIME ALP NOIF EQU BRDID INF1 INF2 INF3 INF4
14AUG09 14:54:50 2 1 001-0-60-00 106 359 0 1 1


END

 

[dugdstew1]

<CNPIP:UNIT=DOM;

PROGRAM UNIT INFORMATION
PU-NAME PU-NO PRODUCT NUMBER REV PATCH
DOM H'1F5 1/CAA 111 9613/011 R5A YES
TYPE
B'0000 0000 0000 0000 0100 1011 0000 0010
TYPEEXT
B'0000 0000 0000 0000 0010 0000 0000 1000
LOADED IN LIM
1 2
ACTIVE CF LOCATED IN LIM 1

END

 

[whosrdaddy]

ok, so the PBX can't copy the unit data of DOM to LIM2 for some reason.

first try to restart the unit DOM in lim1 and see what it does.

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[dugdstew1]

I restared it and tried the dump.

<rfPUI:UNIT=dom,LIM=1;
RFPUI:UNIT=DOM,LIM=1;
SURE? (YES/NO)
<y;

RESTART PROGRAM UNIT
LIM STARTED PU:S FAILED PU:S
1 DOM

EXECUTED

<allop;
ALARM LOG
IDENTITY: FIRSTAMERICAN
VERSION: CXP1010030/5/BC11SP14/R4C

DATE: 14AUG09 TIME: 16:18:23
NO ALARMS IN LOG

END
<dubdp;
BACKUP DATA
EXTERNAL BACKUP LATEST PREVIOUS
REL1 REL2
NOT VALID NOT VALID
LOCAL BACKUP
DIVERGENT TIME AND DATE LIM 1 04:57 08JUN09 01:00 14MAY09
2 04:57 08JUN09 01:00 14MAY09

END

<duSYi;
SYSTEM DUMP INFORMATION
NO VALID RELOAD DIRECTORY EXISTS
RESULT OF PASSIVE COMMON FUNCTIONS UPDATE

BUFFER TRANSFER ERROR 16:19 14AUG09
FAILED IN LIM001 DOM

END

<allop;
ALARM LOG
IDENTITY: FIRSTAMERICAN
VERSION: CXP1010030/5/BC11SP14/R4C

DATE: 14AUG09 TIME: 16:20:20
CLASS: 3
85 BUFFER TRANSFER HAS FAILED
DATE TIME ALP NOIF EQU BRDID INF1 INF2 INF3 INF4
14AUG09 16:18:53 1 2 001-0-60-00 106 359 0 1 1

85 BUFFER TRANSFER HAS FAILED
DATE TIME ALP NOIF EQU INF1 INF2 INF3 INF4
14AUG09 16:19:03 2 1 001-0-**-** 359 6 1 2


END

A bit of a puzzle is it not?

 

[whosrdaddy]

did you do SFCEI; already? forgot to ask.

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[dugdstew1]

No I have not. Will that kill the updates I have done since my last backup?

 

[whosrdaddy]

no, normally not.

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[doktor]

dugdstew1!

I guess that this 2LIM system has been working well for years, before this fault occurred?
What happenede just before the fault was observed?

We have from time to time issues with "electrician" tha cut the common grounding to an MD110/MX-One, or just swap the power feeding to come from another transformer or electrical supply.

In all these cases, I would have liked to knoe "what happened just before".

Are the 2 LIMs in the same room or building?
Do the share a common grounding?
Has anyone fifled with this grounding or power supply.

The link between the 2 LIMs - did you chack it for faults?

Hope that this can help you out of this issue!!


///doktor

 

[ges69]

Hi dugdstew1,

you've already tried to restart the niu board in BPOS 1-0-60?