xerox phaser 8400: 3 errorcodes

[stengel]

I have 3 different errorcodes on this printer.

mostly 07,010.43:20818
sometimes 07,008.41:20818 and 07,009.42:20818

sometimes the printer starts to pull a sheet, but stops "half the way" ans say: paperjam.

could anyone tell me the meanings of the errorcodes?
xerox homepage only say: "call service"...

kind regards,

stengel.

ps: the printer also make noise.

 

[CULTOFLON]

7,008.41 - The printhead tilt is not engaged, so it didn't tilt back properly or the printhead is stuck in the tilted position by the tilt lock arms. The process motor gear train getting out of sync can also cause this error.

7,009.4x - The printhead is tilted back but not in the park arms and restrained properly. This is due to the wiper assembly not moving up far enough for the park arms to hold it.

7,010.4x - The printhead is stuck in the tilt position by the tilt arms. The process motor gearbox being out of sync can also cause this error.

I have seen the wiper assembly get caught between the drum and printhead. Sometimes the wiper needs to be leveled. I hope this helps. Later