VPN error on PIX 515E

[tdoma]

I have just implemented a PIX 515E firewall, in an associate company office, but I am now having problems connecting to our network using W2k PPTP VPN solution.
I am getting the following error on the PIX:
'regular translation creation failed for protocol 47 src inside:192.168.x.x dst outside:155.229.204.x'. This is my 1st PIX implementation. Does this mean I have to permit protocol 47 to access the 192.168.212.x network?
Here is the current config file on the PIX.

PIX Version 6.3(1)
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password EwMdgYM.aUhAhSeq encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname CORE
domain-name COREINITIATIVE.ORG
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol ils 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
names
access-list acl_out permit tcp any interface outside eq www
access-list acl_out permit tcp any interface outside eq smtp
access-list acl_out permit tcp any interface outside eq 6129
access-list acl_out permit tcp any interface outside eq pop3
access-list acl_out permit tcp any interface outside eq 577
access-list acl_out permit tcp any interface outside eq telnet
pager lines 24
logging on
mtu outside 1500
mtu inside 1500
ip address outside 66.149.107.82 255.255.255.248
ip address inside 192.168.212.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
no failover
failover timeout 0:00:00
failover poll 15
no failover ip address outside
no failover ip address inside
pdm location 192.168.1.101 255.255.255.255 inside
pdm location 192.168.212.4 255.255.255.255 inside
pdm location 192.168.212.2 255.255.255.255 inside
pdm location 172.18.124.196 255.255.255.255 inside
pdm location 207.69.188.185 255.255.255.255 outside
pdm logging errors 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) tcp interface

http://www 192.168.212.4

http://www netmask

255.255.255.255 0 0
static (inside,outside) tcp interface smtp 192.168.212.4 smtp netmask 255.255.255.255 0 0
static (inside,outside) tcp interface 6129 192.168.212.2 6129 netmask 255.255.255.255 0 0
static (inside,outside) tcp interface pop3 192.168.212.4 pop3 netmask 255.255.255.255 0 0
static (inside,outside) tcp interface telnet 192.168.212.2 telnet netmask 255.255.255.255 0 0
static (inside,outside) tcp interface 577 192.168.212.2 577 netmask 255.255.255.255 0 0
static (inside,outside) udp 207.69.188.185 domain 192.168.212.2 1087 netmask 255.255.255.255 0 0
access-group acl_out in interface outside
route outside 0.0.0.0 0.0.0.0 66.149.107.81 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
aaa-server partnerauth protocol radius
aaa-server partnerauth (inside) host 172.18.124.196 cisco123 timeout 5
http server enable
http 192.168.1.101 255.255.255.255 inside
http 0.0.0.0 0.0.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
auth-prompt reject Unauthorized Access. Unauthorized use of this system is strictly prohibited
crypto map mymap client authentication partnerauth
telnet timeout 5
ssh timeout 5
console timeout 0
terminal width 80
Cryptochecksum:b316d25b04f2debbe63cdf96316f0a69
: end
[OK]

I also need to remove the following lines from the config:
aaa-server partnerauth protocol radius
aaa-server partnerauth (inside) host 172.18.124.196 cisco123 timeout 5
crypto map mymap client authentication partnerauth

I tried prefixing the commands with a no, but that did not seem to help.

Thank you in advance for your help.

 

[ChicagoTechNet]

quoted from

http://www25.brinkster.com/ChicagoTech

What statements are required to allow a VPN inbound past my Cisco PIX?

The following example is a simple PPTP access list:

access-list 110 permit tcp any host x.x.x.x eq 1723
access-list 110 permit gre any host x.x.x.x


For more tips or information, go to

http://www25.brinkster.com/ChicagoTech

Robert, MS-MVP/MCSE and CNE
Windows & Network Support, Tips and FAQs on

http://www25.brinkster.com/ChicagoTech

Robert Lin, MS-MVP, MCSE & CNE
Windows, Network and How to at

http://www25.brinkster.com/ChicagoTech

 

[tdoma]

I tried the command, specifying the VPN server for the x.x.x.x and that did not work. I have been told by someone that since I am using PAT, it will not work. Is this true anyone?

 

[themut]

You will need to enable fixup protocol pptp 1723 which is availabel starting on 6.3.1. Hope this helps!

 

[tdoma]

Thanks, that worked.

 

[ChicagoTechNet]

themut, thanks for the input.

Robert Lin, MS-MVP, MCSE & CNE
Windows, Network and How to at

http://www25.brinkster.com/ChicagoTech

 

[themut]

You´re welcome guys! I am glad I was able to help.