tftp problem while uploading a config-file

[s21it21]

Hello!

I have configured the pix-inside interface for communicating with my tftp-server (laptop, connected with a cross-over-cable). The interfaces are set to 100full.
When i start the upload (from the pix: configure net), it works for a few seconds. After that i get the error message: WARNING: TFTP download incomplete!

When i do a "wr t" i can not see the whole configuration.

Do you have any ideas?

Regards Martin P.

 

[speedingwolf]

Hi,

I've been experiencing problems with Cisco TFTP server while upload or download config to my TFTP server. I tried SolarWin tftp server and it works great. You might want to try a different version of tftp and see if that helps.

 

[s21it21]

Hello!

Thank you for your information. But it still did it. But it did not work.

Now i got the information, that the PIX-Version 6.2 (1) has a bug built in (TFTP-BUG). This might be the reason, why the upload did not work.
Today i will check it out (i will install a newer version).

Martin