SSH Logging

[krock22]

Hello Guys

I was setting up ssh and came accross a comand that does not seem to work. Can you tell me if this command is bogus?

Location1(config-line)#aaa new-model
Location1(config)#aaa new-model
Location1(config)#username Kemal password 0 dukennstmichnicht23456
Location1(config)#ip domain-name ribolovci.net
Location1(config)#ip ssh time-out 60
Location1(config)#ip ssh authentication-retries 2
Location1(config)#ip ssh logging events
^
% Invalid input detected at '^' marker.

Location1(config)#

ip ssh logging events

Thanks a Lot

 

[burtsbees]

SMS-STL-Edge>en
Password:
SMS-STL-Edge#conf t
Enter configuration commands, one per line. End with CNTL/Z.
SMS-STL-Edge(config)#ip ssh logg ?
events Log SSH events

SMS-STL-Edge(config)#ip ssh logg events
SMS-STL-Edge(config)#

Legit here...depends on your IOS.

/

tim@tim-laptop ~ $ sudo apt-get install windows
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package windows...Thank Goodness!