RAM question...

[dreamchaser]

I have a MicronPC Athlon 1.4GB with Win2k pro OS. I have two slots for memory and can upgrade to 2GB (1GB per slot).

I am considering buying a 1GB module of ddr sdram (pc2100 266mhz 184 pin non-ecc) to go with my already purchased 512MB module of the same type. Currently I have a 256 module in the other slot, but I heard (somewhere...) that with the 1GB size, I need to balance it with another 1GB module, so that each slot has a 1GB module in it. Is this true?

Also, I heard that there is a heat problem with the bigger modules and may need to include another fan. Is this a cyber myth or is it true?

Are there any other special considerations for 1GB modules? Any tips on who makes the best type of RAM that I'm looking for?

Thanks for any help.

 

[dreamchaser]

Hello...any RAM wisdom out there?

 

[gargouille]

Perhaps if you posed your question to the General Discussion group?
This one speaks video (read: off topic)

 

[dreamchaser]

Hi gargouille,

The reason I posted here is because I need the RAM for After Effects. I guess I thought it was somehow appropriate...

 

[gargouille]

I posted over on General.
Isn't that silly (I think I'm getting too much usenet!)

 

[Jakman]

You do not need more than 512 MB.The only abt 99% of the pesent apps exept CAD use more than that.It's basicaly a waste of mony and power resources.

 

[dreamchaser]

Thanks for the input. I need the RAM for After Effects, which I am told can definitely use the extra RAM.